jedyne do czego mogę mieć zastrzeżenie to jakość zdjęć zawartych w przesłanej instrukcji serwisowej ponieważ są fatalnej jakości, praktycznie nieczytelne. tak poza tym jestem zadowolony to jest to czego szukałem.
Instrukcja jest OK. Schematy czytelne, opisane niektóre procedury.
Tekstowy podgląd strony 10 (kliknij aby zobaczyć)
5. Error message list
The table below shows the error messages list of the version up tool. Error message Occurring conditions Invalid firmware file. Select a The Bin file of the selected firmware correct file. was improper. (Example: A BIN file of other unit than the AR-NC5J was selected.) Can�t operate more than 32 Printers of over 32 units were selected and Uploading or test print was performed Upload failed. A communication error occurred during uploading. Failed starting Immediately after completion of communication with firmware uploading, the printer could XX:XX:XX:XX:XX:XX. not enter the loader mode. No response after sending After sending the test print command, the commands to there was no response from the ARXX:XX:XX:XX:XX:XX. NC5J. Timeout time is not available. A value other than 1 - 99 or a character is entered for time out setup. Failed to initialize packet Initialization of the packet driver failed driver. when a single network adapter was installed under Win95/98/Me environment. Initialization of the packet driver failed in an adapter after selecting the adapter when plural network adapters were installed under Win95/98/Me environment. The version up tool was executed under Windows NT/2000 without units at the same time.
6. Check for defectiveness of the AR-NC5J
TEST PRINT Refer to [8]
Is the TEST PRINT normal ? NO Use the cross cable between AR-NC5J and PC.
YES
AR-NC5J Normal
Is the TEST PRINT normal ? NO Return the setup to the initial factory setup.
YES
AR-NC5J Normal Troubles other than the AR-NC5J
Refer to [4]-2
Failed to initialize packet driver. Do you want to use other network adapter?
Is the TEST PRINT normal ? NO
YES
AR-NC5J Normal Troubles other than the AR-NC5J
This program does not work in WindowsNT/2000
environment where IPX installing the IPX/SPX protocol. protocol is not installed. Install IPX protocol or execute in Windows95/98/Me environment.
Does the printer print individually ? (When the AR-NC5J is removed from the machine.) NO
YES
AR-NC5J Trouble �
AR-NC5J Normal Troubles other than the AR-NC5J
� If there is another printer than those which conform to the AR-NC5J,
install the AR-NC5J to be checked, and perform the same procedures to check.
