USING THE 20-BIN SORTER
1 Place the original in the document feeder
tray (when a reversing automatic document feeder is installed) or on the document glass. (Refer to page 4-6 of "Operation manual (for general information and copier operation)".)
5 Touch mode.
READY TO COPY.
the key for the desired output
The touched key is highlighted to indicate that the function is enabled.
OUTPUT NON SORT SORTER
SORT
If the original was placed GROUP on the document glass in step 1, non-sort mode is automatically selected. If the original was placed in the document feeder tray, sort mode is automatically selected.
6 Touch the [OK] key. 2 Select copy settings as needed, including
two-sided or one-sided copy mode, paper size select, exposure adjustment, and copy ratio. (Refer to chapter 5 of "Operation manual (for general information and copier operation)".)
INTERRUPT
0
OK
CENTRE TRAY
3 Touch the [OUTPUT] key.
2-SIDED COPY
7 Set the number of copies as needed and
press the [COLOUR COPY START ( or [BLACK COPY START ( )] )] key.
Replace the original with the next original and press the [START] key. Repeat this operation until all originals have been scanned.
OUTPUT
4 Touch the [SORTER] key.
READY TO COPY.
OUTPUT SORTER SORT
GROUP
NOTES G Maximum number of original pages This is the maximum number of original pages that can be copied at once in sort mode or group mode. In sort mode: The limit is the same as the maximum number of sheets that can be held in one bin. (See *1 in the "SORTER CAPACITY" table on page 3.) In group mode: Up to 20 sheets (the same as the number of bins in the sorter). G Maximum number of copies that can be set The maximum number of copies that can be set in sort mode and group mode is as follows: In sort mode: Up to 20 copies (the same as the number of bins in the sorter) In group mode: The number of sheets that can be held in one bin (See *2 in the "SORTER CAPACITY" table on page 3.) G When "Transparency film with insert sheets" or "A3 (11" x 17") Full-bleed" is selected (these are special functions), the copies are output in non-sort mode. Sort and group modes cannot be selected. G To cancel a copy run, press the [CLEAR] key. Copying will stop and the number in the copy quantity display will be reset to 0.
