INSTALLATION
POSITION
Place the freezer horizontally on a firm surface, resting on all four wheels. The room should be dry and adequately ventilated. This appliance has to be used at the following conditions (climate class "4"): temperature range: 10-30 °C relative humidity: 55%. If the room temperature exceeds 30 °C, falls below 10 °C or the relative humidity exceeds 55%, the appliance will not function as it should. Do not place the freezer close to sources of heat, radiators, chimneys, etc., and do not place the freezer in direct sunlight. If the freezer has been handled standing on end it should be allowed to stand in normal position for about 12 hours before switching it on Please ensure that when the appliance is installed it is easily accessible for the engineer in the event of a breakdown.
ELECTRICAL REQUIREMENTS
Before switching on, make sure that the voltage of your electricity supply is the same as that indicated on the rating plate, located on the backside of the appliance. WARNING: This appliance must be earthed.
SWITCHING ON
Before switching on, the freezer should be cleaned inside. See under �Maintenance�. WARNING: The enclosed wheels must be fitted before switching on the freezer.Do not use the appliance without the wheels because it may result malfunction. Allow the freezer to run for several hours before placing food inside.
