Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 21 (kliknij aby zobaczyć)
EXT SETTING
I DUBBING
You can choose a signal source to be output from an EXT-2 terminal. You can choose any one of the output signal of the device connected to the EXT terminal and the picture and sound from a TV channel you are currently viewing to output it to the EXT-2 terminal.
1 Press the 5 buttons to choose the arrow
from the menu.
EXT SETTING EXT-1 EXT-3 EXT-4 TV BACK
TV OK
DUBBING EXT-2
D0022-EN
2 Press the 6 buttons to choose an EXT
terminal or TV.
The arrow in the menu represents a signal flow. The left side of the arrow denotes a signal source output from the EXT-2 terminal.
EXT-1/EXT-3/EXT-4:
The output signal of the device connected to an EXT terminal passes through the TV and is output from the EXT2 terminal.
TV:
The picture and sound of the TV channel you are currently viewing are output from the EXT-2 terminal.
3 Press the a button to complete the setting.
The menu disappears. Note: � During dubbing, you cannot turn off the TV. Turning off the TV also turns off the output from the EXT-2 terminal. � When you choose an EXT terminal as an output, you can view a TV programme or a picture from the other EXT terminal while dubbing the picture from a device connected to the EXT terminal onto a VCR connected to the EXT-2 terminal. � The RGB signals from the TV games cannot be output.Teletext programmes cannot be output.