Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 21 (kliknij aby zobaczyć)
EXT SETTING
3 Press the ë buttons to choose a name.
Then press the 3 button.
The LIST disappears and the name is assigned to the EXT terminal.
3 Press the 3 button to complete the
setting.
The menu disappears.
� During dubbing, you cannot turn off the TV. Turning off the TV also turns off the output from the EXT-2 terminal. � When you choose an EXT terminal as an output, you can view a TV programme or a picture from the other EXT terminal while dubbing the picture from a device connected to the EXT terminal onto a VCR connected to the EXT-2 terminal. � The RGB signals from TV games cannot be output.Teletext programmes cannot be output.
To erase a name assigned to the EXT terminal:
Choose a blank space.
4 Press the 3 button to complete the
setting.
The menu disappears.
� You cannot choose an EXT terminal name that is not on the name list (LIST).
s '8%%,1*
You can choose a signal source to be output from the EXT-2 terminal. You can do this with the output signal of the device connected to another EXT terminal, or the picture and sound from a TV channel you are currently viewing.
1 Press the ì buttons to choose the EXT-2
terminal.
2 Press the ë buttons to choose another
EXT terminal or TV.
The arrow in the menu represents a signal flow. The left side of the arrow shows a signal source output from the EXT-2 terminal.
EXT-1/EXT-3/EXT-4:
The output signal of the device connected to an EXT terminal passes through the TV and is output from the EXT-2 terminal.
TV:
The picture and sound of the TV channel you are currently viewing are output from the EXT-2 terminal.
