Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 28 (kliknij aby zobaczyć)
28
NOTES:
BUTTON
FUNCTIONS
FREEZE
You can freeze the picture in the main screen into the PIP window. FREEZE Note: When the PIP is off, pressing FREEZE takes a snapshot of the main screen and puts it into the PIP window� great for catching those mail order addresses. Note: When the PIP is on FREEZE stops the PIP picture.
ON/MOVE (Picture in Picture)
PIP allows you to view two pictures simultaneously. (PIP) ON/MOVE
Picture in Picture is available on the following models only: � AV-32D500 � AV-27D500
07 02
EXIT to turn PIP off Note: The PIP channel and main screen channel will appear in the display momentarily right after you turn on PIP. You can leave them up permanently by pressing DISPLAY until you reach the mode. Note: The PIP Screen is 1/9 of the regular screen size. Once PIP is turned on, the ON/MOVE button operates the Move feature.
SWAP
You can swap the PIP picture and the main picture. SWAP
CHANNEL �/+ For PIP
Change the channel in the PIP window. CH �/+
SOURCE
You can select the source for the PIP window. SOURCE
TV V-1 V-2
You can move the PIP window to any of the TV�s four corners. ON/MOVE
Note: When you connect the component input (DVD) to V-2, the PIP window will be blue.
PIP NOTES
D-500 Series models have 2 Tuner PIP and can see two signals at once. This means you can view two channels at the same time.
Note: Each press of the On/ MOVE button will shift the PIP window one position. Note: When the PIP screen has no signal, the PIP window will be blue.
In order for PIP to work, the TV must be set to "TV mode". If you use your VCR to play a video, the VCR will automatically switch your input to VCR mode. In VCR mode, the TV sees only one signal, that of the VCR. In order to view PIP, you then need to press the TV/VCR button on your VCRremote to switch back to TV mode.
