|
|
|
Kto jest w sklepie?
Sklep przegląda 6038 gości |
|
Kategorie
|
|
Informacje
|
|
Polecamy
|
|
|
 |
|
|
Dla tego produktu nie napisano jeszcze recenzji!
 ;
jedyne do czego mogę mieć zastrzeżenie to jakość zdjęć zawartych w przesłanej instrukcji serwisowej ponieważ są fatalnej jakości, praktycznie nieczytelne. tak poza tym jestem zadowolony to jest to czego szukałem.
 ;
Wszystko w porządku.
Instrukcja czytelna i kompletna.
Dziękuję.
all right!
thank you.
;
Bardzo dobra instrukcja. Zawiera wszystko co potrzeba, polecam!
;
Instrukcja jest OK. Schematy czytelne, opisane niektóre procedury.
;
Instrukcja bardzo czytelna. zawiera co potrzeba. Polecam
AV-32230 AV-32260
ADJUSTMENT OF WHITE BALANCE
Item WHITE BALANCE (Low Light) Adjustment Measuring instrument Signal generator Test point Adjustment part No.1 BRIGHT R CUTOFF G CUTOFF B CUTOFF
[LOW LIGHT] MODE
Description Note : Set VIDEO STATUS to �STANDARD�. 1. Receive a black-and-white signal.(Color off) 2. Select the [LOW LIGHT] MODE from the SERVICE MENU. 3. Set the initial setting value of BRIGHT is 063 with the LEFT / RIGHT key of the remote control unit. 4. Set the initial setting value of R CUTOFF, G CUTOFF and B CUTOFF is 085 with the 4 to 9 key of the remote control unit. 5. Display a single horizontal line by pressing the 1 key of the remote control unit. 6. Turn the screen VR all the way to the left. 7. Turn the screen VR gradually to the right from the left until either one of the red, blue or green colors appears faintly.
SCREEN VR [In HVT]
BRIGHT
999
999 999
G CUTOFF
999
BRIGHT B CUTOFF
R CUTOFF
REMOTE CONTROL UNIT
H.LINE ON H.LINE OFF EXIT
8. Adjust the two colors which did not appear until the single horizontal line that is displayed becomes white using the 4 to 9 keys of the remote control unit. 9. Turn the screen VR to where the single horizontal line glows faintly. 10. Press the 2 key to return to the regular screen.
1
R CUTOFF
2
G CUTOFF
3
B CUTOFF
9
The 3 EXIT key is the cancel key for the WHITE BALANCE.
4
R CUTOFF
5
G CUTOFF
6
B CUTOFF
7
8
9
WHITE BALANCE (High Light) Adjustment
Signal generator
R DRIVE B DRIVE
Notes: � Proceed to the following this adjustment after having completed the adjustment of LOW LIGHT WHITE BALANCE. � Set VIDEO STATUS to �STANDARD�. 1. Receive a black-and-white signal. (Color off) 2. Select the [HIGH LIGHT] MODE from the SERVICE MENU. 3. Set the initial setting value of R DRIVE and B DRIVE is 060 with the 4 , 6 , 7 and 9 keys of the remote control unit. 4. Adjust the screen until it becomes white using the 4 , 6 , 7 and 9 keys of the remote control unit.
[HIGH LIGHT] MODE
HIGHT LIGHT
9
999
B DRIVE
The 3 (EXIT) key is the cancel key for the WHITE BALANCE.
999
R DRIVE
REMOTE CONTROL UNIT
H.LINE ON H.LINE OFF EXIT
1
R DRIVE
2 5 8
3
B DRIVE
4
R DRIVE
6
B DRIVE
7
9
No. 51802
25
|
|
|
> |
|
