jedyne do czego mogę mieć zastrzeżenie to jakość zdjęć zawartych w przesłanej instrukcji serwisowej ponieważ są fatalnej jakości, praktycznie nieczytelne. tak poza tym jestem zadowolony to jest to czego szukałem.
Instrukcja jest OK. Schematy czytelne, opisane niektóre procedury.
Tekstowy podgląd strony 56 (kliknij aby zobaczyć)
AV-48WP74 AV-56WP74 Measuring instrument Signal generator Remote control unit
Item A-D CONVERTER OFFSET adjustment (2)
Test point
Adjustment part [1.PICTURE/SOUND] F44 : Image adjustment F45 : Image adjustment of mode change F47 : Minimum value B at the time of detection F48 : Maximum value A at the time of detection [8.PP] ADM012 : R offset AMD013 : G offset AMD014 : B offset
Description [WHITE BALANCE LOW LIGHT ADJUSTMENT for SPLIT RIGHT SCREEN] (1) Press [SPLIT] key to enter the SPLIT screen mode. (2) Select STANDARD with [VIDEO STATUS] key. (3) Select FULL mode with [ASPECT] key. (4) Select 1 PICTURE SOUND from SERVICE MENU. (5) It goes into the zero mode screen of difference adjustment of color, using <F45>(Image adjustment mode change) as 0 to 3 and <F44>(Image adjustment) as 0 to 1. (6) Set <F47> (minimum value B at the time of detection) to 0 and <F48> (minimum value A at the time of detection) to 0. (7) Press [MUTING] key and memorize the set value. (8) Press [BACK] key and back to SERVICE MENU. (9) Select 8.PP from SERVICE MENU. (10) Adjust <ADM012> (R offset setup) and <ADM014> (G offset setup) so that right upside screen becomes whole black. (11) Press [MUTING] key and memorize the set value. (12) Select 1.PICTURE/SOUND from SERVICE MENU. (13) Change the data of <F44> 1 to 0 and <F45> 3 to 0. (14) Press [MUTING] key and memorize the set value.