PIONEER AVD-W6010/EW
Instrukcja Serwisowa

AVD-W6010

8. OPERATIONS AND SPECIFICATIONS
8.1 OPERATIONS

Key Finder
Component Parts and Features

1 SEL/POWER button
Selects the system�s audio and video simultaneously. If AV equipment is connected to the system�s RCA audio and video output terminals, the audio and video of the source selected with this button are generated. Pressing this button for 2 seconds also switches power ON/OFF.

6 2/3 buttons
Adjust the item when the setup menu is displayed.

7 Ambient light sensor
Senses ambient light. This system automatically adjusts the brightness of the display to compensate for ambient light.

2 V.SEL button
Selects only the display�s video.

8 Signal receptor
This receiver receives signals from the remote controller supplied with the mobile navigation unit and other AV equipment.

3 SP.SEL button
Selects only the built-in speaker�s audio.

9 Built-in speaker
Outputs sound from audio equipment connected to this product.

4 WIDE/MENU button
Changes the method of enlarging 4:3 video to 16:9 video. Pressing this button for 2 seconds, and displayed the setup menu. Once the setup menu is displayed, its menu is switched each time the button is pressed.

0 Lock release lever

5 Volume control (�/5) buttons
Adjust the volume of the built-in speaker 9, or change setup items when the setup menu is displayed. Note:
� Never set the volume so high that you cannot hear outside traffic and emergency vehicles.

74