PIONEER AVD-W9000/UR
Instrukcja Obsługi

Section

Before You Start

02

3

Connect the cable to the display unit.

2 Unlock the lock release lever, then slide the display unit and detach it from the base.
Base

Mounting arm (sold separately)

Removing the display unit
To deter theft of the display unit, remove the display unit when leaving the vehicle. 1 Hold down the release section and unplug the connector.

Lock release lever

Resetting the microprocessor
The microprocessor must be reset under the following conditions: ! Prior to using this unit for the first time after installation ! If the unit fails to operate properly ! When strange or incorrect messages appear on the display % Press RESET on the hide-away unit with a pen tip or other pointed instrument.

English

RESET button

En

7