Nie masz w koszyku żadnych produktów
|
Kategorie
|
Informacje
|
Polecamy
|
|
Dla tego produktu nie napisano jeszcze recenzji!
Section
Before You Start
02
3
Connect the cable to the display unit.
2 Unlock the lock release lever, then slide the display unit and detach it from the base.
Base
Mounting arm (sold separately)
Removing the display unit
To deter theft of the display unit, remove the display unit when leaving the vehicle. 1 Hold down the release section and unplug the connector.
Lock release lever
Resetting the microprocessor
The microprocessor must be reset under the following conditions: ! Prior to using this unit for the first time after installation ! If the unit fails to operate properly ! When strange or incorrect messages appear on the display % Press RESET on the hide-away unit with a pen tip or other pointed instrument.
English
RESET button
En
7
|
|
 |
> |
|
|
Parse Time: 0.178 - Number of Queries: 94 - Query Time: 0.032