PIONEER AVG-VDP1
Instrukcja Serwisowa

Section

08

Setup adjustments

2

# When Clock Adjust is not displayed, touch until you see it displayed.

Touch Clock Adjust.

Selecting the video format
You can switch the video output format of VIDEO OUT between NTSC and PAL. 1 2 Touch Menu and then touch SETUP. Touch Format Setting.

3 Touch + or  to set the time difference. Clock can be adjusted for the time difference by one-hour.

Setting RPM alert
If you set an RPM value for caution, this unit beeps and displays an alert message when the RPM of your vehicle reaches the set RPM value. ! Alert is shown in the display when the RPM reaches to 80%, 90% and 100% of RPM value you have set for caution. 1 2 Touch Menu and then touch SETUP. Touch R"P"M Alert.

# When Format Setting is not displayed, touch until you see it displayed.

3 Touch Format to switch between NTSC (NTSC) and PAL (PAL). When selecting PAL (PAL), the video output in the PAL 60 format is outputted from this unit. Please make sure that your display/VCR is compatible with PAL 60.
Note When using this units VIDEO OUT, display the V.D.P. image outputted from this unit on the front display.

# When R"P"M Alert is not displayed, touch until you see it displayed.

3 Touch Caution to turn RPM alert on or off. 4 Touch + or  to set the value of RPM alert.

Setting speed alert
If you set a speed value for caution, this unit beeps and displays an alert message when the speed of your vehicle reaches the set speed value. 1 2 Touch Menu and then touch SETUP. Touch Speed Alert.

# When Speed Alert is not displayed, touch until you see it displayed.

3 Touch Caution to turn speed alert on or off. 4 Touch + or  to set the value of speed alert.

30

En