Operating this unit
! The automatic close/open function will operate the display as follows. � When the ignition switch is turned OFF while the LCD panel is opened, the LCD panel will close after six seconds. � When the ignition switch is turned ON again (or turned to ACC), the LCD panel will be opened automatically. � Removing or attaching the front panel will automatically close or open the LCD panel. (Refer to page 11.) ! When the ignition switch is turned OFF after the LCD panel has been closed, turning the ignition switch ON again (or turning it to ACC) will not open the LCD panel. In this case, press OPEN/CLOSE to open the LCD panel. ! When closing the LCD panel, check to make sure that it has closed completely. If the LCD panel has stopped halfway, leaving it like this could result in damage.
! When adjusting the LCD panel angle, be sure to touch TILT ( / ). Forcibly adjusting the LCD panel by hand may damage it.
% Touch TILT ( / ) to adjust the LCD panel to an easily viewable angle. The LCD panel angle continues changing as long as you touch TILT ( / ) and hold.
CAUTION
Keep hands and fingers clear of the unit when opening, closing, or adjusting the LCD panel. Be especially cautious of children�s hands and fingers.
% Press OPEN/CLOSE to open the LCD panel.
# To close the LCD panel, press OPEN/CLOSE again.
# The adjusted LCD panel angle will be memorized and automatically returned to the next time the LCD panel is opened.
Turning the LCD panel horizontal
When the LCD panel is upright and it hinders the operation of the air conditioner, the panel can be turned horizontal temporarily. % Press and hold OPEN/CLOSE to turn the LCD panel horizontal.
# To return to original position, press and hold OPEN/CLOSE again. # The LCD panel returns to the original position automatically with beeping sound 10 seconds after operation.
Adjusting the LCD panel angle
Important ! If you can hear the LCD panel knocking against your vehicle�s console or dashboard, touch TILT ( ) to move the LCD panel a little forward.
