|
|
|
Kategorie
|
|
Informacje
|
|
Polecamy
|
|
|
 |
|
|
Dla tego produktu nie napisano jeszcze recenzji!
 ;
Dobrej jakości skan - wkońcu mogłem poznać wszystkie funkcje tego odtwarzacza - polecam .
;
Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Section
Audio Adjustments
13
+6 6 is displayed as the level is increased or decreased. 5 Touch and then touch or to select the desired frequency. Touch or until the desired frequency appears in the display. Low: 40Hz80Hz100Hz160Hz Mid: 200Hz500Hz1kHz2kHz High: 3.15kHz8kHz10kHz12.5kHz 6 Touch and then touch or to select the desired Q factor. Touch or until the desired Q factor appears in the display. 2W1W1N2N
Note If you make adjustments, CUSTOM curve is updated.
1 Touch A.MENU and AUDIO and then touch BASS. 2 Touch or to select the desired frequency. Touch or until the desired frequency appears in the display. 40Hz63Hz100Hz160Hz 3 Touch or to adjust the bass level. Each time you touch or increases or decreases the bass level. +6 6 is displayed as the level is increased or decreased.
Adjusting treble
You can adjust the cut-off frequency and the treble level. ! If SFEQ has been set to FRONT1 or FRONT2, treble adjustment affects only the front output: rear output cannot be adjusted. (Refer to Setting the sound focus equalizer (SFEQ) on page 64.) 1 Touch A.MENU and AUDIO and then touch TREBLE. 2 Touch or to select the desired frequency. Touch or until the desired frequency appears in the display. 2.5kHz4kHz6.3kHz10kHz 3 Touch or to adjust the treble level. Each time you touch or increases or decreases the treble level. +6 6 is displayed as the level is increased or decreased.
Adjusting bass and treble
You can adjust bass and treble settings. ! If EQ-EX function has been selected and only when EQ-EX is turned on and CUSTOM is selected as the equalizer curve, you can adjust bass and treble settings. (Refer to Compensating for equalizer curves (EQ-EX) on page 63.)
Audio Adjustments
Adjusting bass
You can adjust the cut-off frequency and the
bass level. ! If SFEQ has been set to FRONT1, bass adjustment affects only the rear output: front output cannot be adjusted. (Refer to Setting the sound focus equalizer (SFEQ) on page 64.)
Adjusting loudness
Loudness compensates for deficiencies in the low- and high-sound ranges at low volume.
En
61
|
|
|
> |
|
