SHERWOOD AVP-9080RDS
Instrukcja Obsługi

When CD, DVD, LD or AUX/TV is selected ENGLISH as input source
Select the digital (or the analog) input connected as desired.

Adjust the (overall) volume.

4
MASTER VOLUME

2
D I G I TA L I N P U T

or

DOWN

UP

Each time this button is pressed, the corresponding input is selected as follows. When a digital input is selected, the DIGITAL INPUT button lights up in green. � In the DTS mode. Opt(ical) Coax(ial)

To mute the sound.

5
Opt(ical) Coax(ial) �MUTE� will flicker. To resume the previous sound level, press it again. To listen with the headphones.

� In the Dolby Digital mode:Not available for CD (RF:LD PLAYER only)

To play back the laser disc encoded into the Dolby Digital format in the Dolby Digital mode, you should select the RF input as the desired digital input. � In the normal stereo or a surround mode other than the DTS and Dolby Digital modes. Opt(ical) Coax(ial)

6
PHONES

To listen to Dolby Digital program source in the 2-CH downmix mode, in the stereo mode, the corresponding digital input (LD player : RF) should be selected. (For details, refer to �Downmixing into 2 front channels� on page 21) Notes : When the selected optical or coaxial digital input is not connected, the selected �Opt� or �Coax�will flicker, meaning no sound.(Refer to �Select the desired surround mode� on page 17.) When the DTS or the Dolby Digital mode is selected, the component connected to the selected digital input can be heard regardless of the selected input source. Operate the selected component for play back. When the headphones are plugged, the sound from the speakers is cut off. When listening to DTS or Dolby Digital program source in the DTS or the Dolby Digital mode, if the headphones are plugged, it enters the 2-CH downmix mode automatically. (For details, refer to �Downmixing into 2 front channels� on page 21)

3
When playing back the program sources with surround sound, refer to �ENJOYING SURROUND SOUND� on page17.

14