HOT / COLD FILL INSTALLATION INSTRUCTIONS
If you wish to connect hot and cold water supply (fig. 1): i) Fix the red marked inlet hose at the hot water tap and at the inlet valve with the red filter on the rear side of the machine. Fix the other inlet hose at the cold water tap and at the inlet valve with the blue filter on the rear side of the machine. MAKE SURE: a) b) The connections are tightly fixed. Do not invert their position (for example: cold fill into hot inlet valve and vice versa).
Programmes with Prewash last approx. 15 minutes longer. The consumption data have been measured in the conditions specified in Standard IEC 60456. Consumption in individual homes may differ from the values given in the table due to variations in the pressure and temperature of the water supply, the load and the type of laundry.
If you wish to connect only the cold fill follow the below instructions (fig. 2): �) You need a Y-piece connector. The Y-piece connector can be ordered via our Service Organization or purchased in a specialized hydraulic component store. �) �) Fix the Y-piece connector to the cold fill tap. Connect the two inlet valves present on the rear part of the machine to the Y-piece connector using the relative provided hoses.