IGNIS AWL 210/1
Instrukcja Obsługi

18190-gb.fm5 Page 6 Monday, November 12, 2001 10:41 AM

PRECAUTIONS AND GENERAL RECOMMENDATIONS
1. Packing The packing box may be fully recycled as confirmed by the recycling symbol. 2. Energy saving tips � Always dry a full load: depending on the type of laundry and the programme/drying time. � Always use the maximum allowed spin speed of your washing machine. You will save time and energy when running your drying cycle. � Do not overdry the laundry. � Clean the lint filter after every drying cycle. � Place your dryer in a room with a temperature between 15° C and 20° C. In case of higher temperature ventilate the room. � Always select the correct programme/drying time for the load in order to obtain the desired drying results. � Select the gentle option only with small loads. � When drying cotton, for example: dry iron dry and cupboard dry loads together. Start with the iron dry programme/drying time setting, remove the laundry to be ironed at the end of that cycle and dry the remainder of the load on the cupboard dry setting. 3. Disposing of packaging and old appliances. The dryer is built from reusable materials. The dryer must be disposed of in compliance with local waste disposal regulations. � Before scrapping, cut off the power cable so that the dryer cannot be connected to the mains. 4. Child safety: Children must not be allowed to play with the dryer. 5. General recommendations: � Always set the programme/time selector knob to the �0� position after use. This prevents the dryer from being switched on accidentally. � Before cleaning or carrying out maintenance, switch off the dryer and disconnect it from the mains supply. � To clean the outside of the dryer, use a neutral detergent and a damp cloth. � Do not use abrasive detergents. � Wipe away lint from the door seal and the door using a damp cloth. � If the lint filter mesh is clogged, clean it with water and a soft brush. 6 � If necessary, the power cable may be replaced with an identical one obtained from our After-Sales Service. The power cable must only be replaced by a qualified technician. EC Declaration of Conformity This dryer has been designed, constructed and distributed in compliance with the safety requirements of EC Directives: � 93/68/EC. � The dryer must only be used in the household for the prescribed uses.