GB
CONSUMPTION DATA
Water Programme (l) Cotton 95° C with Pre-wash Cotton 95° C Cotton 60° C Synthetic 60° C Cotton Short 40° C Synthetic 40° C Delicate 40° C Wool 40° C 1 2 3 4 5 6 7 80 70 70 60 65 60 80 80 (kWh) 2.00 1.80 1.20 0.90 0.70 0.60 0.60 0.60 Energy Programme duration (min) 120 110 90 85 75 75 70 65
PROGRAMME START
1. Plug in the appliance. 2. Turn on the water supply tap. 3. Press the �On/Off� button.
DOOR LOCK
The door locks automatically after the programme start until the end of the programme.
PROGRAMME END
� The programme sequence indicator is at �Stop�. 1. Press the �On/Off� button. 2. Cancel the special options by pressing the appropriate buttons. 3. Turn the water supply tap(s) off. 4. Wait for the door to unlock (about 2 minutes). 5. Open the door and unload the machine. Note: Do not fully close the door but leave it ajar to allow the drum to dry out.
PROGRAMME RESELECTION
1. Press the �On/Off� button. 2. Select the new programme and relative options. 3. Press the �On/Off� button.
SELECTING THE PROGRAMME
Turn the programme selector knob clockwise to the programme with the desired temperature.
NOTES AND INDICATIONS FOR USE Water level
It may not be visible as the cycle is optimised for a minimum water consumption without compromising washing results.
PRESS THE DESIRED SPECIAL OPTION BUTTON
Cold Wash button � The water is used at the water supply temperature.
Cleaning the pump filter
To ensure an impeccable function of the pump, check the filter regular and clean it if necessary. Close the filter properly to avoid leakage.
Motor smell
Washing machine motor creates a typical electrical smell during first cycles, this is normal and disappears after a few cycles.