VENT CONNECTION
Normally the hose and adaptor are not supplied; the accessory kit, available at your dealer or our After Sales Service, should be used.
Installing the vent hose
A. Place a towel or the packing material on the right-hand side next to the dryer. B. Place the dryer on its right-hand side (seen from the front) on the towel or the packing material. C. Push the adapter into the hose (see illustration). Attach the air vent hose adapter to the connection located under the dryer and lock it by means of the foreseen lugs. Venting outside � Without kinking it, lead the vent hose outside (inside diameter 10 cm, maximum length with two bends 3 m). � Ensure that the vent hose does not sag when stacking the dryer on a washing machine. It should only be placed horizontally or upwards. � Do not connect to ventilation systems protected by fly nets. These can become clogged and cause malfunctioning of the dryer. � Do not connect the air vent hose to a chimney or to a mechanical ventilation extractor duct. � Do not connect the vent hose to the heating system. Only connect the hose to ventilation systems insulated against humidity. � Please provide adequate ventilation to avoid the back flow of gases into the room from appliances burning other fuels, including open fires. Dryer operation without vent hose � Only use the dryer in a large, well-ventilated room. � Keep the room free of dust and lint. A minimum distance of 10 cm between rear of appliance and the wall must be observed. Dryer placed close to the wall; venting to the left or right Install the dryer by using the bi-directional kit, available at your dealer.
C
IMPORTANT
For example, alternative to be used. � Do not connect to ventilation systems protected by fly nets. These can become clogged and cause malfunctioning of the dryer.