1 Press the TIMER ON ( ) button. 2 The TIMER ON indicator will blink; press the TIME ADVANCE or REVERSE buttons to set
the desired time. (The time can be set in 10minute increments.)
3 Point the remote control at the signal receiver
DISPLAY
window on the unit and press the TIMER SET (SET/C) button.
� The orange TIMER lamp ( ) on the unit will light. � The unit will generate a beep when it receives the signal.
14
MODE
1h
Select the operation condition.
CLEAN FAN SWING SET/C
� The unit will turn on prior to the set time to allow the room to reach the desired temperature by the programmed time. (Awaking function)
2 3
COMBINED USE OF ON AND OFF TIMERS
You can use the ON and OFF timers in combination.
Example:
To stop operation at 11:00 p.m. and resume operation (With the same mode and temperature settings) to bring the room temperature to the desired level by 7:00 a.m.
ENGLISH
1 Set the TIMER OFF to 11:00 p.m. during opera2 Set the TIMER ON to 7:00 a.m.
The arrow ( or ) between the TIMER ON indicator and the TIMER OFF indicator shows which timer will activate first.
tion.
NOTES:
� You cannot programmed the ON-TIMER and OFF-TIMER to operate the unit at different temperatures or other settings. � Either timer can be programmed to activate prior the other.
