You can adjust the relative volume between the LINE IN terminals. Once the relative volume is set, each component connected to the AZ-1 will have the approximate same volume level.
4 Press and hold the SETUP button for more than 2
seconds (or leave the unit idle for 10 seconds) to exit the Gain setup mode.
1 Select an input to be changed (LINE1, LINE2 or
< Settings are stored even when power is turned off and the unit is unplugged. If left unplugged for an extended period, the settings may be lost. < If you lightly press the SETUP button, the unit enters name and skip setting mode. See page ?? for details.
LINE3/PHONO) by turning the INPUT knob. Start with the component that has the lowest volume level.
2 Press and hold the SETUP button for more than 2
seconds.
The unit enters setup mode, and �GainL*>***� appears on the display. (*** changes depending on your setting.) If you leave the unit idle for 10 seconds, the setup mode will be cancelled.
