|
|
|
Kategorie
|
|
Informacje
|
|
Polecamy
|
|
|
 |
|
|
Dla tego produktu nie napisano jeszcze recenzji!
Programming Tutorial Editing Presets
To Change the Instrument for any Layer in the Preset
6. 7.
Move the cursor back up to the �rst �eld in the �rst line (the layer). Use the Data Entry Control to select the layer you want.
L2
INSTRUMENT
ROM:B3
0104 org: 1 6� D i r e c t Fb
8.
Repeat steps 3 and 4 for each selected layer. Find an instrument that sounds good when combined with the previous instruments selected.
With all these great instruments to work with, you really can�t go wrong. Now let�s play with the tuning.
Changing the Tuning of an Instrument
Tuning the selected layer of the preset changes the pitch of the key on the controller. If the numbers are �00,� it means that the instruments are tuned to concert pitch (A=440 Hz). The Coarse tuning value represents whole semitone intervals. The Fine tuning value shifts the pitch in 1/64 semitones (or 1.56 cents).
To Tune the Instrument of the Current Layer
1.
Scroll through the Edit menu until you come to the Tuning page.
L1
TUNING Coarse: +36 Fine: +6
2. 3.
Move the cursor to the Coarse �eld (using the cursor button). Set the value to +12 to shift the pitch up a whole octave. To shift the pitch in smaller units than a semitone, use the Fine �eld.
Try tuning one of the instruments to a perfect �fth above the other by setting the Coarse value to +7. Tuning an instrument far out of its normal range completely changes the character of the sound. For example, if you tune a bass guitar up 2 octaves, it's going to sound rather petite. On the other hand, if you tune it down 2 octaves, you can probably rattle plaster off the walls! Experiment with radical pitch shifting. You'll be surprised at the results.
130 E-MU Systems
|
|
|
> |
|
