Connections The Bass Multi Chorus has a single input and a pair of outputs. Out 1 is used if the Bass Multi Chorus is being connected to only one amplifier or mixer channel. Out 2 is used for stereo operation. Connect Out 1 to the first amplifier or mixer channel panned hard left and Out 2 to the second amplifier or mixer channel panned hard right. The Bass Multi Chorus also has built-in CIT� cabinet modeling. This is a useful tool when running a distortion pedal into the Bass Multi Chorus and then running direct into a mixer or recorder. This creates a through-an-amplifier sound without having to use a bass amp. The CIT model is based off a 4x10 cabinet. To Enable CIT� Cabinet Modeling: Press the pedal down and apply power (connect a 1/4� cable to the Bass Multi Chorus input or connect the PS200R power supply to the AC adapter jack). CIT� cabinet modeling has to be turned on each time you apply power to the Bass Multi Chorus.