Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 16 (kliknij aby zobaczyć)
Operating Instructions
�
The refresh interval may change depending on the network condition, PC performance and what object you view. SD memory recording, using IPsec or enabling Motion Detection will also increase the refresh interval. When displaying video (Motion JPEG), the camera allows up to 30 simultaneous accesses. The 31st user trying to access will see a gray screen. The Buffered Image page is also limited to a maximum of 30 simultaneous accesses. To reduce the data traffic, the video can be automatically changed to refreshing still images on the General User page (see page 80). To display the Single Camera page directly, add it to the [Favorites] on the web browser. To view dark images, enable color night view mode on the Camera Setup page (see page 70). The image will be brighter, but the refresh interval may increase (1 frame a second at maximum) and image quality may decrease in a dark place. (See page 70). The following error messages can be displayed. Error Message Cause and Remedy Images cannot be displayed outside the Operation Time (see page 137). The camera allows a maximum of 30 simultaneous accesses when the Refresh Interval is set to [Motion] and when accessing the Buffered Image page. Users who try to access the camera when the maximum number of access has already be reached will see a gray screen. To view camera images, wait, then click the Refresh button on your browser. If viewing the Single Camera page, you can also switch to still images.
�
� � �
�
The operation time has ended. The maximum number of accesses has been exceeded.
