JVC BC-D231U
Instrukcja Obsługi

MENU SETTINGS

Menu contents (contd.)
The items optional software are shown the BC-D232Uin the shaded areais installed. when the BC-D231U optional board or Items Colorimetry Settings OFF [ON] Contents Turns the colorimetry parameter conversion function ON/OFF. This function allows SD (ITU-R601) to be converted to HD (ITU-R709). Normally, set to ON. When this function is set to OFF, the normal display format changes. ( p. 5) Sets the delay time from the input to the output. 1FRAME : Delays by 1 frame (33.37 ms). 1FRAME-90H : Delays by 1 frame -2.67 ms for 1080I. Delays by 1 frame -2.00 ms for 720P. Selects the audio signal group (groups 1 to 4) multiplexed on the SD digital serial input signal. When audio is not to be used or when the frame synchronizer function is activated, select NO USE. Sets the delay for the audio signal multiplexed on the SD digital serial input signal. Adjustment of ±30 (msec.) is possible with respect to the delay time set with <Out Delay>. Four independent memories are provided to store menu settings. Selects the memory to be used to store the set menu contents. * Items in the administration sub menu are not stored in memory. Recalls menu setting stored in memory. When set to DEFAULT, menu setting set before shipment is recalled. [ ]: Factory Setting

Menu contents (contd.)
The items in the shaded area are shown when the BC-D231U optional board or the BC-D232U optional software is installed. Items Administration Remote ID [1] 31 Remote Speed 9600 19200 [38400] [REMOTE-IN] ALARM Sets the transmission speed (bit/s) of the remote control signal. Settings Contents Press the [ENTER/MENU] button to enter the administration sub menu. The following nine items can be set on the administration sub menu. Sets the remote ID of this unit to remote-control this unit from the Host. [ ]: Factory Setting

Out Delay

[1FRAME] 1FRAME-90H

Audio Group

NO USE [1] 2 3 4 �30 [0]

�

Remote Port

Audio Delay

Selects the connection port for the host when this unit is remote-controlled. REMOTE-IN : Connects RS-485 to the [REMOTE-IN] port. Set to this position to remote-control this unit via the [REMOTE-IN] connector. ALARM : Connect the RS-232C to the [ALARM] port. Set to this position to remote-control this unit via the [ALARM] connector. Sets the number of effective lines of the input signal when <Output> is set to �1080I�. With <Output> set to �720P�, the number is fixed at 480 lines (on the menu, --- is shown). When set to �OFF�, the output from the rear panel�s [ALARM] connector stops (always open except when power is turned off). The setup levels for D2 and the analog input signal are set. � This function is effective only when the Input setting item is D2, COMPONENT, or CVBS. Adjusts the phase of the CVBS input signal. � This function is effective only when the Input setting item is CVBS.

Profile Save

MEMORY 1 MEMORY 2 MEMORY 3 MEMORY 4 MEMORY 1 MEMORY 2 MEMORY 3 MEMORY 4 DEFAULT [OFF] ON

�

Active Line

30

480 [486]

Alarm Setup (BC-D231U) Phase Adj. (BC-D231U)

OFF [ON] [0] 7.5 -20 [0]

Profile Load

Name Version Serial No. License key

[BC-D2300]

�
20 Sets the device name that will be shown in the normal display. For setting, refer to page 9. Shows the firmware version of this unit. Shows the serial number of this unit. Sets the license key to enable optional features such as the variable enhancer and color compensation function. For setting, refer to page 9. To obtain the license key, consult your JVC dealer. Shows the approx. number of operating days of this unit. Press the [ENTER/MENU] button twice to clear this number to 0. Use this as a guide for determining when to replace the fan. Running Time

Color Bar

When set to ON, the built-in color bar (7-line color bar) is output regardless of the input. The color bar output turns off automatically when you quit this menu.

14

15