Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 22 (kliknij aby zobaczyć)
22
SOUND
ADJUSTMENT
Adjusting the sound levels
SOUND
Press repeatedly until the sound cue you want is displayed Then adjust the sound level to your liking... Raises the sound levels; increases the sound in the right speaker; or cuts the loudness function in Lowers the sound levels; increases the sound in the left speaker; or cuts the loudness function out
The SOUND button enables you to adjust the sound coming out of the BeoSound Century speakers.
The display shows the current volume level.
then
�
or
�
You can adjust the volume level and the bass and treble levels to suit your personal taste; you can alter the balance between the left and right speakers to direct the sound towards your favourite listening position; and you can cut the loudness function in or out, as you like. Each time you press the SOUND button, a cue appears in the display, indicating which adjustment can be made, and showing the current setting. Use the volume buttons, � and �, to adjust as required. See the next page if you want to store your new sound levels. If you don�t, the adjusted levels will be reset to their original values when the system is switched to stand-by.
Volume can be adjusted in steps of two within a range of 00 to 72.
The display shows the current balance setting � here neutral. Balance can be adjusted within a range of 6 to either side.
The display shows the current bass level � here neutral. Bass can be adjusted within a range of -5 to +5.
The display shows the current treble level � here neutral. Treble can be adjusted within a range of -5 to +5.
The display shows the current loudness setting � glowing steadily for ON, blinking for OFF.