CANON BJW3000
Instrukcja Serwisowa

CHAPTER 1. GENERAL DESCRIPTION

3) With the edge of the SIMM in the slot, roll the SIMM to the left until the hooks [3] at both ends of the slot click into the holes at both ends of the SIMM.

C. SIMM Removal
1) Using the installation tools supplied with the printer, remove the 4 screws [1] and the cover plate [2].
[2]

[3]

[1]

Figure 1-503 Figure 1-504 4) Attach the cover plate [2] and tighten the 4 screws [1]. 2) Gently pull back the two hooks [3] at each end of the SIMM. Roll the SIMM to REFERENCE � When only one SIMM is used, it must be installed in the left slot (SIM601). � When adding two SIMMs, it is easiest to install the first one into the left slot (SIM601).
[3]

the right and remove it.

Figure 1-505 3) Attach the cover plate [2] and tighten the 4 screws [1].

1�37