DESCRIPTION
� The Height of the lift is wrong on your turntable � The Height of the Arm Rest is wrong on your turntable � You do not have the Arm Collar
HOW TO ADJUST
� Adjust the lift height by moving the bent lift bar unscrewing with the Allen key supplied the hex bolt positioned in front of it � Adjust the Arm Rest height by moving its shaft up or down screwing its stainless steel bolt � collar Ask your local dealer to get a proper Bluenote
ARM REST HEIGHT ADJUSTMENT ARM VTA ADJUSTMENT
� The VTA tone arm is Hard to adjustable �
� The Bluenote 3 arm board collar hex bolts are screwed into the collar too much and do not let the arm shaft gets in it; unscrew the hex bolts properly � Once the proper height of the arm is been approximately reached, fix the shaft with just a hex bolt before screwing properly all the 3 hex bolts of the collar � Adjust the movement by gently screwing clockwise or anti-clockwise the cover of the cylinder of the arm lift shaft which push the internal calibrated spring � The tone arm does not have a scaled counterweight. An external scale must be used to find it moving the counterweight forward and backward on its shaft. P.N. Eventually see the paragraph about the levelling of the tonearm. � The tone arm is been designed to be used with cartridges that have a minimum total weight of 5gram up to circa 25gram
ARM LIFT MOVEMENT
DOWN
SPEED
� The Speed of the tone arm going down is wrong � It�s hard to find the right tracking force of your Phono cartridge
COUNTER WEIGHT ADJUSTMENT
PHONO CARTRIDGE MATCHING
� Do not know what and how to match a Phono cartridges
