|
Dla tego produktu nie napisano jeszcze recenzji!
 ;
Documentation made available quickly and It is good quality. Thanks.
1.6
HOW TO REMOVE THE MECHANISM ASSEMBLY
To remove only the mechanism assembly from the mechanism unit. (1) Remove the shield case on the DV/CPU board and remove the CN107 FPC wire from the drum assembly.
CN107
To: CN114 MDA/DC board
To: CN117 MDA/DC board To: CN119 MDA/DC board
Fig. 1.6.3 Mechanism assembly
Fig. 1.6.1 (2) Remove the FFC wires that connects the mechanism board, which is mounted on the backs of the mechanism assembly, MDA/DC board, and the DV/CPU board. (3) Remove the four screws 7 on the side. (4) Remove the mechanism assembly as shown in Fig. 1.6.3.
For instructions on disassembling each part of the mechanism assembly, please refer to the Section 2.
7
7
Fig. 1.6.2
1-5
|
