Documentation made available quickly and It is good quality. Thanks.
Tekstowy podgląd strony 12 (kliknij aby zobaczyć)
1-7. Replacement of Main Parts
1-7-2. Replacement of 40-pin connector
1. Remove the two screws (�). 2. Remove the six screws and remove the 40-pin bracket. 4. Solder the new 40-pin connector on the CN-1176 board. 5. Attach the 40-pin connector in the reverse order of removal steps. 6. Check that the 40-pin connector is free by hand.
40-pin bracket Screws (M2.6 � 5) Screws (�)
Screws (M2.6 � 5)
40-pin connector
Screws (M2 � 3)
3. Desolder the CN-1176 board and remove the 40-pin connector.
