STARTING YOUR WASHER (CONT.)
8. Turn the Cycle Selector knob to the desired wash cycle. See �Selecting a cycle and time� later in this section.
Stopping/restarting your washer
� To pause the washer at any time, push the
Start/Pause button. The Cycle Status lights will flash while the washer cycle is paused. If left in pause, the cycle will terminate after 2 hours.
� To restart the washer, close the lid (if necessary)
9. Push the Start/Pause button to start the washer. NOTE: The Cycle Selector knob will NOT rotate as the cycle progresses. � The Cycle Status lights indicate the operation being performed within the cycle. � When the cycle is complete, all Cycle Status lights will be Off. NOTE: To change a cycle selection after the cycle has started, turn the Cycle Selector knob to Off, then select a new cycle. and push the Start/Pause button. � To cancel cycle, turn Cycle Selector knob to Off. Cycle Status lights will turn off. NOTE: When lid is opened during a cycle, all machine operation will stop. Cycle will resume when lid is closed.
LOADING
Loading suggestions
For these suggested full-sized loads, set the Water Level selector to the highest setting. COMPACT WASHERS Heavy Work Clothes 3 work shirts 2 pair pants Knits 2 slacks 2 shirts � or � 3 dresses Delicates 1 camisole 2 slips 2 panties 2 bras 1 nightie 1 half slip Mixed Load 1 pair slacks 2 pillowcases 2 shirts 1 T-shirt Permanent Press 6 shirts � or � 2 double sheets 2 pillowcases � or � 2 single sheets 2 pillowcases
Towels 9 bath towels � or � 6 bath towels 3 hand towels 6 wash cloths
