Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 6 (kliknij aby zobaczyć)
TECHNICAL DATA
Hob dimensions length width height length width radius 572 mm 502 mm 43 mm 560 mm 490 mm 55 mm Rating plates
Cutout dimensions
Typ 071.2 Instr. No.
CC 3065 Ser.No. 400 V ~ 50 Hz SWISS MADE
Prod.No. 941 592 671 6.9 kW
Voltage Total power
230/400 V ~ 50 Hz 6.9 kW
Typ 072.2 Instr. No. CC 3065 Ser.No.
Prod.No. 941 592 670 6.9 kW 230 V ~ 50 Hz SWISS MADE
OPERATING INSTRUCTIONS
Cooking zones The cooking zones are clearly marked on the ceramic surface. Only the cooking zone which is switched on will be heated up. The remaining surface will not get hot.
Control panel The hob CC 3065 can be combined with the control panel CP 218.
Heat control knobs The control knobs enable the regulation from 1-10 of the heating capacity. The control knobs for the one-circuit (as well as for the inner circle of the two-circuit cooking zone) can be turned to the left and to the right. Setting it back to "0" turns off the cooking zone.
Double circuit cooking zone If the second circle of the two-circuit cooking zones (No.2 and 3) is needed, the control knob concerned has to be turned over position "10" to the final stop from where it automatically springs back to position "10". The temperature can now be controlled by turning back the knob in the opposite direction to the wanted position. Setting it back to "0" turns off the cooking zone.
