One-Touch Recording 31
A One-Touch Recording (OTR) is an immediate timed recording from 30 minutes to eight hours long. Before you begin, make sure: q Channels are set. Details are on page 10. q There is a tape in the TV/VCR. The record tab must be intact.
4
Press the STOP/EJECT button on the TV/VCR to stop the OTR.
POWER CLEAR
1
Press the COMBI button, then use the CH(annel) o/p p buttons or the Number buttons to select the channel you want to record.
EJECT MENU STATUS /EXIT
FM
1
2 5 8 0
PLAY
3
ALT.CH
1 2
Press the SPEED button until the desired recording speed (SP or SLP) appears on the screen. Details are on page 30.
SLEEP/ WAKE UP
4
6
7
9
3
REC /OTR
PAUSE /STILL
REW
F.FWD
3
VOL.
STOP
Press the REC(ord)/OTR button repeatedly until the desired recording length appears in the upper right corner of the screen. Recording will begin immediately. The Record light will appear.
OTR CH12 LENGTH 0:30
CH. MUTE CABLE /DBS
COMBI
SMART PICTURE
SPEED MEMORY VCR PLUS+
2
F.ADV SLOW ENTER TRACKING VAR.SLOW INDEX SKIP SEARCH
LENGTH : PRESS OTR CANCEL : PRESS CLEAR
4
To stop an OTR before recording is finished, press the STOP/EJECT button on the TV/VCR. Or, press the REC(ord)/OTR button, then press the CLEAR button, then press the STOP/w button on the remote control. If the end of a tape is reached during an OTR, recording will stop. The TV/VCR will turn itself off and eject the tape. The Record light will flash rapidly. The TV/VCR will turn off at the end of the OTR.
Helpful Hints
� To check the time remaining for an OTR, press the STATUS/EXIT button. � To change the recording length while an OTR is in progress, press the REC(ord)/OTR button until the desired recording length appears on the screen. � You can not pause an OTR. � To cancel an OTR but continue recording, press the REC(ord)/OTR button, then press the CLEAR button. � You cannot record if DEFEAT RECORDING is ON. Details are on page 33. � You can change the tape speed with the SPEED button while a recording is in progress, but some distortion may appear on the tape.