your washer properly ensures maximum washing efficiency. This section gives you information to help you to select a cycle, time, and temperature for your wash load.
Before
starting
your washer
NOTE: Remove any hang tags or temporary labels before using your washer.
Add measured detergent. Then place a sorted load in the washer before starting. See page 12 for additional �Before you wash� information.
Starting
or stopping
your washer
Startlng your washer: 1. Select a water level and water temperature.
2. Push in and turn the Cycle Control Knob clockwise. Stop when the indicator on the knob�s outer ring points to the number in the wash cycle you want. The numbers are minutes of wash time. 3. Pull out the Cycle Control Knob. Refer to pages 8-9 for additional information to help you make selections.
Stopping
l
and restarting
your washer:
l
To stop the washer at any time, push in the Cycle Control Knob. To restart the washer, close the lid (if necessary) and pull out the Cycle Control Knob.
Selecting
a water
Ieve
Position the WaterCevel Selector at the setting that corresponds to the size load you want to wash. Select a water level based upon the size of the load and the fabric you are washing. See page 12 for additional loading information. To change the water level setting after the washer has started to fill, move the Selector to the desired new setting.
