30 One Touch Recording
The one touch recording (OTR) function allows you to program an immediate timed recording from 30 minutes to eight hours long without setting the timer. Before you begin, make sure: q Channels are programmed. q There is a tape in the TV/VCR. The record tab must be intact.
4
Press the STOP/EJECT button on the TV/VCR to stop the OTR.
POWER
SLEEP
1
1 4 7 2 5 8 0 3 6 9
+100
MUTE
ALT.CH
Use the CHANNEL Up/Down buttons or the Number buttons to select the channel you want to record.
CHANNEL
o
1
p o
VOLUME
2
Press the (Tape) SPEED button until the desired recording speed (SP, LP, or SLP) appears on-screen. Details are on page 29.
2
�
SPEED
p
o PLAY REW STOP p F.FWD +
3 3
Press the REC(ord)/OTR button repeatedly, until the desired recording length appears in the upper right corner of the screen. Recording will begin immediately. The REC(ord) light will appear.
OTR CH12 LENGTH 0:30
REC/OTR MEMORY
PAUSE/STILL VCR PLUS+
MENU
STATUS/EXIT CLEAR
SMART SOUND
LENGTH : PRESS OTR CANCEL : PRESS CLEAR
Helpful Hints
� To check the time remaining for an OTR after the OTR has been set, press the STATUS/EXIT button. � To change the recording length while an OTR is in progress, press the REC(ord)/OTR button until the desired recording length appears on-screen. � You can not pause an OTR. � To cancel an OTR, but continue recording, press the REC(ord)/OTR button, then press the CLEAR button. � You cannot record if the TV/VCR is in Record Defeat mode. Details are on page 40. � You can change the tape speed with the (Tape) SPEED button while a recording is in progress, but some distortion may appear on the tape. � If the end of the tape is reached during an OTR, recording will stop. The TV/VCR will eject the tape and shut itself off. The REC(ord) light may flash.
4
To stop an OTR before recording is finished, press the STOP/EJECT button on the TV/VCR. Or, press the REC(ord)/OTR button, then press the CLEAR button, then press the STOP/w button on the remote control.
