PHILIPS CCX133AT99
Instrukcja Obsługi

Recording 29
Read and follow the steps below to record a TV program.

1 2 3 4

Place a tape with its record tab intact (see page five) in the TV/VCR. The power will come on. Or, if the tape is already in the TV/VCR, press the POWER button. Press the (Tape) SPEED button until the desired tape speed appears on the TV/VCR screen. Details about tape speed are given below.

1 2 6 4

POWER

1 4
EED

2 5 8 0

3 6
MUTE

ALT.CH SLEEP

CHANNE

o

L

3 5

7

9

+100

SP

Use the CHANNEL Up/Down buttons or the Number buttons to select the channel to be recorded. (Channels cannot be changed during recording.)

VOLUME

p

o

p

o PLAY � REW p F.FWD +

STOP
REC/OTR MEMORY
PAUSE/STILL VCR PLUS+

MENU

STATUS/EXIT CLEAR

SMART SOUND

Press the REC(ord)/OTR button once to start recording. The REC(ord) light will glow. q If there is not a tape in the TV/VCR, NO CASSETTE flashes onscreen briefly. q If the tape does not have a record tab, PROTECTED CASSETTE / CANNOT RECORD flashes on-screen briefly. The TV/VCR will eject the tape. Replace it with another tape.

To pause the recording (for example, during commercials), press the PAUSE/STILL button. The REC(ord) light will flash. To resume recording, press the PAUSE/STILL button again or the REC(ord)/OTR button. The REC(ord) light will glow.

5 6

To stop recording, press the STOP/w button. Tape Speeds This chart shows the recording/playback time for three types of video cassettes (T160, T120, and T60). There are three playback speeds: SP, LP, and SLP. During playback, the TV/VCR selects the tape speed automatically. When recording, you can change the tape speed using the (Tape) SPEED button (see page 22). Tape Speed Maximum Record/Playback Time Type T160 T120 T60 SP 2 hrs. (Standard Play) 40 mins. LP 5 hrs. (Long Play) 20 mins. SLP 8 hrs. (Super Long Play) 2 hrs. 4 hrs. 6 hrs. 1 hr. 2 hrs. 3 hrs.

Helpful Hints
� Recording options are on pages 30 - 39. � You cannot record if the TV/VCR is in Record Defeat mode (REC DEFEATED will flash on-screen). Details are on page 40. � If you pause a recording for more than five minutes, the TV/VCR will switch to Stop mode automatically to protect the video cassette tape from damage. � You can change the tape speed with the (Tape) SPEED button while a recording is in progress, but some distortion may appear on the tape.