PIONEER CDJ-500-2
Instrukcja Obsługi

BASIC OPERATION To search for a particular frame
[Using the Jog dial] Press PLAY/PAUSE during playback, and rotate the Jog dial in pause mode. ÷ Rotating the jog dial clockwise initiates search in the forward direction and rotating it counterclockwise initiates search in the reverse direction. ÷ One rotation of the jog dial searches by 75 frames. ÷ The audio of normal playback can be heard when the jog dial is rotated at a speed between 0.8 and 1.2 revolutions per second (rps). [Using the SEARCH buttons ( 1, ¡ )] Press the SEARCH buttons ( 1 or ¡ ) in pause mode moves in the specified direction by one frame per press.

Switching ON/OFF of the Auto Cue function
When the TIME MODE/AUTO CUE button is kept pressed for more than 1 second, the Auto Cue function is set to ON or OFF. When the Auto Cue function is set to ON, the AUTO CUE indicator in the display window lights up.

Playback operation using the auto cue function
1 Press the EJECT button. 2 Load a disc. ÷ Place a disc correctly centered in the disc compartment with the label side up. With a 3inch (8 cm) disc, place the disc in the groove of the 3-inch (8 cm) disc guide correctly. ÷ Do not place more than one disc in the disc compartment. 3 Push the door in to close. 4 Press the PLAY/PAUSE button. ÷ Press the PLAY/PAUSE button after the CUE indicator lights. 7 When the selection is finished playing, the player searches for the beginning of the next selection to be played. The CUE indicator lights up and the 6 indicator blinks, and the player enters playback standby mode. The next selection is played immediately by pressing the PLAY/PAUSE button.

To search for a particular passage
[Using the SEARCH buttons ( 1, ¡ )] While ¡ is kept pressed, playback rapidly advances toward the end of the disc. While 1 is kept pressed, playback rapidly reverses toward the beginning of the disc. [Using the Jog dial] If the Jog dial is rotated more than 2 rps in playback mode, playback advances or reverses with the sound.

APPLICATION OPERATION
The setting of the cue point
If the cue point is memorized in the player, the player enters playback standby mode at the cue point by pressing the CUE button. 1 During playback, search for the cue point while listening to the playback sound by pressing the SEARCH buttons ( 1, ¡ ) or while watching the PLAYING ADDRESS display in the display window. Press PLAY/PAUSE so that the player enters pause mode. 2 Rotate the Jog dial slowly to search for the desired point precisely. ÷ To set the cue point while listening to the playback sound, release the Jog dial when the desired sound is heard and return to the point just before the desired point. (The point just behind where the Jog dial was released is set as the cue point.) 3 Press the CUE button when the frame number or playback has reached the desired point. ÷ Cue point memory is completed when the playback is muted and the CUE indicator lights up. ÷ The last stored cue point is cleared when a new cue point is memorized.

÷ To set the cue point
Press the CUE button in pause mode. memorizes in the player playback direction

11
<DRB1223> En