Advanced Operations
Advanced Operations
QUICK RETURN JOG MODE VINYL
¶ When the PLAY/PAUSE button (6) is pressed once again to resume playback, the sound accelerates at the speed set with the VINYL SPEED ADJUST TOUCH/RELEASE dial.
AUTO BEAT LOOP 1,2,4,8 LOOP IN/ REALTIME CUE LOOP OUT (OUT ADJUST) RELOOP/EXIT
Quick return
When the jog mode is set to [VINYL], pressing the surface of the jog dial returns playback instantly to the cue point.
VINYL SPEED ADJUST TOUCH/RELEASE
1. Press the JOG MODE VINYL button so that the button indicator lights.
¶ The jog dial�s [Vinyl] indicator also lights.
2. Press the QUICK RETURN button so that the button indicator lights.
¶ The jog dial display will shown the flashing cue point position indicator.
1, ¡
CUE PLAY/PAUSE
SEARCH
3. During playback, press the surface of the jog dial.
¶ If a cue point has been stored in memory, the playback will return instantly to the stored cue point; if no cue point has been stored in memory, the playback will not change. ¶ Playback will also return to the in-point (cue point) if the Jog dial is pressed during loop playback. ¶ During MP3 playback, quick return can be performed within the same folder.
6
Jog dial
Loop playback Scratch play
When jog mode is set to [VINYL], pressing the top surface of the jog dial and turning it causes playback to occur in proportion to the speed and direction of jog dial rotation.
7 Defining a loop
1. Press the PLAY/PAUSE button (6) to begin playback. 2. During playback or pause, press the LOOP IN/REALTIME CUE button.
¶ This operation is not required if a prerecorded cue point has already been set as the loop start point.
1. Press the JOG MODE VINYL button so the button indicator lights.
¶ The jog dial�s [Vinyl] indicator also lights.
2. During playback, press the top surface of the jog dial.
¶ Playback will slow and stop (the deceleration time until full stop [�response characteristics�] can be set separately). If the jog dial is rotated before playback decelerates to full stop, sound will stop, and playback will then be performed in response to the direction and speed of jog dial rotation in step 3.
3. When playback reaches the desired loop-out point, press the LOOP OUT button.
¶ The AUTO BEAT LOOP 8 (1/1) button indicator lights. ¶ Playback will begin between the loop-in and loop-out points. ¶ During MP3 play, the loop can be set only between points set within the same track. ¶ When the loop has been set, the RELOOP/EXIT button lights.
3. Rotate the jog dial in the direction and at the speed you wish playback to be performed.
¶ Playback will be heard in the direction and speed proportional to the jog dial rotation.
7 Shorten the loop length
When manual mode is used to create a loop during playback or pause, the AUTO BEAT LOOP 8 (1/1) button will light.
4. Remove hand from jog dial.
¶ Playback will either acceleration or decelerate to return to its status before the jog dial was touched (the acceleration/deceleration time until playback returns to its previous condition [�response characteristics�] can be set separately).
Press one of the AUTO BEAT LOOP buttons (1, 2, 4 or 8).
¶ When the AUTO BEAT LOOP 1 (1/8) button is pressed, the button indicator lights and loop play begins between the loop-in point to a point 1/8 of the full length of the original loop. ¶ When the AUTO BEAT LOOP 2 (1/4) button is pressed, the button indicator lights, and loop play begins between the loop-in point to a point 1/4 of the full length of the original loop. ¶ When the AUTO BEAT LOOP 4 (1/2) button is pressed, the button indicator lights, and loop play begins between the loop-in point to a point 1/2 of the full length of the original loop. ¶ When the AUTO BEAT LOOP 8 (1/1) button is pressed, the button indicator lights, and loop play begins between the loop-in point to a point 1/1 (all) of the length of the original loop.
7 This function sets the time to full stop when the jog dial�s surface is pressed, and the time from full stop to normal playback speed when the surface of the Jog dial is released.
Rotate the VINYL SPEED ADJUST TOUCH/RELEASE dial.
¶ Rotating the dial changes the deceleration speed (response) from playback to full stop, and the acceleration speed (response) from full stop to normal playback.
Spin play
During playback in VINYL mode, either press the surface of the jog dial or press the PLAY/PAUSE button (6) to pause playback, then rotate the jog dial quickly; playback will occur in the direction and at a speed proportional to the direction and speed of jog dial rotation, even if you then release your hand from the jog dial.
After setting the loop, if you press one of the AUTO BEAT LOOP buttons while holding the LOOP IN/REALTIME CUE button depressed, the following operations will be performed:
¶ When AUTO BEAT LOOP 1 (1/8) button is pressed: 1/8 loop (1/ 64th of the initially created loop) ¶ When AUTO BEAT LOOP 2 (1/4) button is pressed: 1/4 loop (1/ 32nd of the initially created loop) ¶ When AUTO BEAT LOOP 4 (1/2) button is pressed: 1/2 loop (1/ 16th of the initially created loop). ¶ When AUTO BEAT LOOP 8 (1/1) button is pressed, 1/1 loop (1/ 8th of the initially created loop). ¶ When the RELOOP/EXIT button is pressed, loop play is canceled and the previous loop mode (auto/manual) is restored.
Braking
¶ During playback in VINYL mode, if the PLAY/PAUSE button (6) is pressed to pause playback, the sound decelerates at the braking speed set with the VINYL SPEED ADJUST TOUCH/RELEASE dial.
38
En <DRB1437>
