Schematy są ale można wysilić się i zrobić kolorowy skan i o większej rozdzielczości. Wtedy schematy płytek będą czytelniejsze. Całość super jako wartość merytoryczna. Wszystkie dane potrzebne do podłączenia różnego rodzajów urządzeń takich gramofon, CD itd.
jedyne do czego mogę mieć zastrzeżenie to jakość zdjęć zawartych w przesłanej instrukcji serwisowej ponieważ są fatalnej jakości, praktycznie nieczytelne. tak poza tym jestem zadowolony to jest to czego szukałem.
Tekstowy podgląd strony 3 (kliknij aby zobaczyć)
CD-P6000/CD-30
2 ADJUSTMENTS AND CHECKS
調��確�
2-1 Replacement of the Pickup Assembly
2-1-1 Cautions in handling
�
Before servicing the pickup assembly be sure to prevent electrostatic-inducer destruction by grounding not only test equipment in use but also yourself. *Electrostatic charge drastically shortens the operating life of the laser diode or possibly results in its destruction. � LD terminals are factory-strapped before shipment to protect LD from electrostatic discharges during transportation. (Fig. 21) After connector insertion, unstrap the LD terminal with a soldering iron. The temperature of the soldering iron tip must be 320� or below (30W) and the unstrapping should be performed quickly. � Don't disassemble the pickup ass'y. � Don't apply shock to the pickup ass'y. � Don't place the assembly in a place subject to excessive dust, heat or moisture. � The LD chip is manufactured from GaAs and GaAlAs, which contains toxic As (Arsenic). Parts removed in servicing should be disposed of with due care.
2-1-2 Objective
Never look directly into the LD or observe the laser beam through another lens or mirror. � Don't touch the objective with fingers. � If objective becomes dirty, playback will deteriorate. To clean the objective, moisten a good cleaning tissue, such as made by KODAK, in isopropyl alcohol and wipe the objective gently. Wipe off and excess fluid with a dry cleaning tissue.
�
