|
Dla tego produktu nie napisano jeszcze recenzji!
 ;
Bardzo dobra jakość skanu, przystępna cena. Instrukcja serwisowa okazała się przydatna przy "reanimowaniu" dwudziestoparoletniego decka, który teraz pięknie gra :)
;
...instruction is ok.
...instrukcja jest ok.
Thanks/Dzięki
;
Documentation made available quickly and It is good quality. Thanks.
Sensor Adjustment 1. Enter the adjustment mode and select �Mech Adjust� with the JOG dial, and press the dial. 2. Press the GROUP 1 button to operate the loading mechanism, and continue pressing until the disc table locks. (Fig-3) 3. Loosen the fixing screw and move the holder so that both PLAY button LED (green) and the ARTIST MODE button LED (green) light. If the holder is not in the correct position, the MEGA CONTROL button LED (orange) or the PAUSE button LED (orange) lights. 4. Moving the disc table right and left with a hand after the screw is fixed, the table will move by the play of a disc table. If the LEDs light up alternately, the adjustment will be performed correctly. (Fig-4)
ARTIST MODE
At this position,this part will be locked.
FIg-3
MEGA CONTROL
Holder (table sensor 400) S tight, screw (PTTWH 3 � 6)
Table (400) assembly
Swing
FIg-4
17
|
