|
Dla tego produktu nie napisano jeszcze recenzji!
Sensor Adjustment 1. With the power ON, while pressing the GROUP 4 and · buttons, press the +100 button to enter the mechanism adjustment mode. 2. Press the GROUP 1 button to operate the loading mechanism, and continue pressing until the disc table locks. (Fig-3) 3. Loosen the fixing screw, move the holder (TABLE SENSOR) slightly, and when the LED (green) of the PLAY button switches to the LED (orange) of the PAUSE button (or vice versa), secure the holder (TABLE SENSOR). (Fig-4) 4. Moving the disc table right and left with a hand after the screw is fixed, the table will move by the play of a disc table. If the LEDs light up alternately, the adjustment will be performed correctly. (Fig-4)
GROUP1 PAUSE button GROUP4 PLAY button
Linked with P indicator Linked with · indicator PLAY indicator PAUSE indicator
At this position,this part will be locked.
FIg-3
Fixed screws
Holder (table sensor)
Table assembly
Swing
FIg-4
� 16 �
|
