Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 5 (kliknij aby zobaczyć)
Optical digital connections
1 For recording and playing (using a suitable fibre-optic cable, available from your supplier) connect the CD Recorder based on the diagram below. To do so, remove the dust caps from the digital optical connections. We recommend that you save the caps.
(PRE-) AMPLIFIER - CD PLAYER - DAT RECORDER
Using the remote control
Inserting the batteries 1 Open the battery lid. 2 Insert two �AAA� (R03 or UM-4) batteries in the manner indicated. 3 Replace the lid. English
USING THE RECORDER
The numbers between parentheses refer to the fold-out illustration.
Attention! Do not use old and new batteries together. Never use different types of batteries (standard, alkaline, etc.) together. Note: - The player cannot be switched on and off using the remote control. - Always point the remote control directly towards the recorder and make sure there are no obstacles between the remote control and the appliance. - When you press a button on the remote control, the indicator (49) on the display of the CD Recorder will light up.
Switching ON and OFF
1 Connect the plug on the mains cable in the proper connection point (30). Plug the cable into the mains.
IN
OUT OPTICAL
Inserting and removing discs
27 28 29 30
2 Press the Power ON/OFF button on the front (1) of the CD Recorder to turn it on (display will light up) or off.
POWER ON/OFF PHONES LEVEL
Inserting discs 1 Press the OPEN/CLOSE button (6) on the front of the appliance to open the disc drawer. 2 Insert an appropriate disc (see Introduction 1 and 2 p. 5) in the appropriate area in the drawer with the label facing up. 3 Gently press the front of the drawer or press the OPEN/CLOSE button (6) to close the drawer.
