PHILIPS CDR760BK99
Instrukcja Obsługi

RECORDING
Start digital recording 1 With the recorder stopped, press RECORD to enter the Record standby mode. � RECORD will flash.

Synchronized digital recording - CD-SYNC

RECORD

FINALIZE

ERASE

CD-Sync

DIG AUTO ANALOG PROG

TRACK

REPEAT 1 TOTAL

REM

TRACK

TIME

CD SYNC RECORD FINALIZE ERASE
Recordable

DIG PROG

TRACK

REPEAT 1 TOTA L

RE M

TIME

CD

RECORDABLE

L R -50 -40
-30 -20 -10 -6

RECORDABLE

L

COPY

-3

0

OVER

� If DIG also flashes, the digital connection is incorrect. 2 To start recording, press PLAY and immediately start the source (from stop mode). � RECORD lights continuously. The track number and recording time used will be indicated on the display. � To record a 3-second silence at the start of a track, press PAUSE. � To check the (remaining) recording time, press DISPLAY. (This can also be done during the recording.) 3 To stop recording, press STOP on the CD recorder. � RECORD will go out. � To interrupt recording, press PAUSE. � RECORD starts to flash. Resume at step 2. After recording the display will show UPDATE for several seconds. Note: With AUTO TRACK on, the recorder will stop automatically. Recordings from DAT or DCC will stop after 20 seconds silence. With AUTO TRACK off, the AUTO STOP mode is disabled. Preparing for synchronized digital recording The CD-SYNC feature enables you to make a fast and easy digital recording of a CD. Track increments are automatically detected from the digital source material. Track increments cannot be added manually. 1 Make sure the disc is absolutely free of scratches and dust particles. 2 Press Source repeatedly until (depending on the connection used): � DIG COAXIAL or DIG OPTICAL will appear on the display. Start synchronized digital recording 1 With the CD recorder stopped, press CD-SYNC. � On the display, CD-SYNC & SYNC appears. After a time, RECORD starts to flash.
DIG AUTO ALOG PROG TRACK REPEAT 1 TOTAL REM TRACK TIME CD SYNC RECORD FINALIZE ERASE COPY

� If DIG also flashes, the digital connection is incorrect. 2 To start recording, press Play on the digital source. � The CD recorder automatically starts to record and RECORD lights continuously. The track number and recording time used will be indicated on the display � If you start the source during a track, CD-SYNC will not start recording until the beginning of the next track. � To check the (remaining) recording time, press Display. (This can also be done during recording) 3 To stop recording, press STOP on the CD recorder. � CD-SYNC and RECORD will go out. � To interrupt recording, press PAUSE. � RECORD will start to flash. To resume, press PLAY on the CD recorder.

13

English