HHB CDR-850
Instrukcja Obsługi

SKIPPING UNDESIRED TRACKS

Clearing skip ID from a track

3, 4 1

6

1

Press the SKIP PLAY button to turn the SKIP ON indicator off.
÷ With a CD-R or CD-RW disc which does not contain skip IDs, the SKIP ON indicator will not light even when the SKIP PLAY button is pressed.

2
SKIP ID SET

2

Play the track with the skip ID to be cleared. Select it with the numeric buttons of the remote control unit or the 41 or ¡¢ buttons (4 or ¢ on the remote control unit). During playback of the track which is not to be skipped, press the SKIP ID CLEAR button.
�SKIP� and �CLEAR?� are displayed alternately.
÷ When the 41 or ¡¢ buttons (4 or ¢ on the remote control unit) are pressed while �SKIP� and �CLEAR?� are displayed, tracks to which the skip IDs are set will be played in order of track numbers. ÷ The selected tracks play back repeatedly. ÷ If you press the SKIP ID CLEAR button during playback of a track without a skip ID, the unit searches for the next track with a skip ID (or it returns to the beginning if there is no next track) and starts playback. ÷ To cancel the clearing mode, press the 3 button or SKIP ID SET button.

REPEAT

3

2
2 5 8 >10 3 6 9
TIME

1 4 7 10

3

2

1
SKIP PLAY

4
Turn this off. Extinction. Apague esto.

To clear a track of the skip ID, press the SKIP ID CLEAR button again while the track is playing. Skip IDs can be cleared from other tracks by repeating steps 2 to 4 for each of them. After having cleared the required skip IDs, press the OPEN/CLOSE 0 button.
÷ When the button is pressed to remove the disc, the skip ID clear data is recorded on the disc. At this time, and blinks �OPEN� is displayed for a few seconds, and the tray opens after the skip ID clear data has been recorded.

5 6

2
1 4 7 2 5 8 3 6 9

or ou o

10

>10

CAUTION: Skip IDs cannot be set or cleared with CDs, finalized CD-R discs, or finalized CD-RW discs.
SKIP ID

3 4

SET

CLEAR

SKIP ID

SET

CLEAR

6

OPEN/ CLOSE

84
<PRE1282> En