|
Dla tego produktu nie napisano jeszcze recenzji!
Playing Compact Discs
Setting Player to Play Discs via Radio
Modulating frequencies selector This system can change the frequency at which the FM car radio receives the CD audio signals within the range of 87.9 to 90.1 MHz in 0.2 MHz increments. (The initial setting is 89.1 MHz.) If there is a strong broadcast station signal near the current frequency, radio interference may occur. If it occurs, change the frequency. Source level adjuster When you play discs, if the volume is low compared with that for FM increase the volume level. If the volume is high and there is distortion, decrease the volume level. (The initial setting is �LEVEL-4�.)
[Page 20~21]
Pre-emphasis selector Normally, set the pre-emphasis selector to �PRE-EMP 1�. (The initial setting is �PRE-EMP 1�.) Play a disc. If you feel the treble is insufficient, switch the selector to �PRE-EMP 2� to boost the treble slightly. � When the selector is set to �PRE-EMP 2�, the sound may distort with some car radios. In this case, switch it back to �PRE-EMP 1�.
or
1. Hold down button for more than 2 seconds. The modulator setting mode will be entered, and the frequency will be displayed. MEMO
If you do nothing within the next 8 seconds, the modulator setting mode returns to the normal mode without changing the most recent settings.
20
|
