SONY CDXM600/R
Instrukcja Serwisowa

CDX-M610 SECTION 3 PHASE ALIGNMENT
3-1. ARM (A-L) ASSY, ARM (B-L) ASSY

4 arm (A-L) assy

5 stop ring 1.5, type-E

2 stop ring 1.5, type-E 1 arm (B-L) assy

3 spring (arm L)

bracket (L) assy

3-2. CAM (L)
1 Move the arm (B-L) assy in the direction of the arrow A and the arm (A-L) assy in the direction of the arrow B fully (full open state). 2 Align the hole on the cam (L) with part C and install the cam. 4 Turn the cam (L) clockwise and counterclockwise to verify that both the arms are operated. 3 stop ring 1.5, type-E

hole

cam (L)

C

A

arm (B-L) assy arm (A-L) assy B

23