PIONEER CDXMG6036
Instrukcja Serwisowa

CDX-MG6036ZH

7.1.2 DISASSEMBLY

- Removing the upper case (not shown)
1. Remove the five screws, then remove the upper case.

- Removing the Extension Unit (Fig. 1)
1. Remove the three screws B, then remove the side frame and holder. 2. Remove screw C, screw D and PCB from the connector. 3. Straighten the three currently bent claws, then remove the extension unit.

- Removing the Grille Assy (Fig. 1)
1. Remove the two screws A and the connector, then remove the grille assy.

Fig. 1

- Removing the CD Mechanism Module (Fig. 2)
1. Remove the three screws A, then remove the front frame. 2. Remove the three screws B and two screws C, then remove the damper and holder. 3. Remove the two spring As, spring B and spring C from the hook, then remove the CD mechanism module.

� Precautions on Assembly � Apply spring C (black) to the front side hook. Remaining springs A and B are to be hung on the center hook.

Fig. 2

- Removing the Keyboard PCB (Fig. 3)
1. Remove screws A and B, then remove the switch PCB. 2. Remove the four screws C, then remove the guide. 3. Remove the four screws B and screw A, then remove the keyboard PCB.

Fig. 3

53