SANYO CE21DN7C
Instrukcja Serwisowa

OPTION SETTING
[After replacing the Memory IC (IC803)]
The memory IC, IC803, stores the option data of TV set and service adjustments data for each circuit, therefore, when the memory IC is replaced, it should be programmed following setting and �SERVICE ADJUSTMENT� on next page.

To enter to the Option Mode
+ Press and hold the F/OK button on the remote control and Pw button on the front panel of the TV. The option window will appear on the screen. Set the options as shown below.
OPTION
ON-TIMER SORT MODE PLUG & PLAY WELCOME TEXT CODE TEST WSS WIDE OPTION 312/313 Mode AV3 OPTION 3D SURROUND SIF OPTION ON AUTO TUNING ON ON OFF ON OFF 4 LANGUAGE ON ON ON BG + DK

ADJUST :

EXIT : RECALL

OPTION SETTINGS FOR CE21DN7-C-00

To set the option mode
+ Highlight the desired option item by using the Pv or Pw button . + To switch the option mode, use the Volume - (LEFT) or Volume + (RIGHT) button. + The data which is set in the option mode is stored into the memory IC automatically. Following table shows the available option items and default setting mode.

Option Mode
ON-TIMER SORT MODE

Mode
ON or OFF AUTO TUNE/SORT or AUTO TUNING or ATS EURO PLUS

Description & Note
On-timer available, default �ON� Tuning mode, default �AUTO TUNING�

PLUG & PLAY WELCOME TEXT CODE TEST WSS WIDE OPTION 312/313 Mode AV3 OPTION 3D SURROUND SIF OPTION

ON or OFF ON or OFF OFF or ON ON or OFF ON or OFF 4 or 7 LANGUAGE ON or OFF ON or OFF ON or OFF

Plug & Play mode, default �ON� Display message when first set up, default �OFF� For factory use, default �OFF� Wide Screen Signaling available, default �ON� Wide mode, default �ON� Language option , default �4 LANGUAGE� Teletext mode, default �OFF� Front AV disable, default �ON� 3D Surround available, default �ON�

BG, I, L/L� or BG or BG, DK Television system, Default �BG, I, L/L� �

Exit from the Service Mode + Press the RECALL
? button.

-7C2KYV