WHIRLPOOL CEDC392JQ0
Instrukcja Obsługi

Complete Installation
1. Check to be sure all parts are now installed. If there is an extra part, go back through the steps to see which step was skipped. 2. Check to be sure you have all of your tools. 3. Dispose of all packaging materials. 4. Check the dryer�s final location. Be sure the vent is not crushed or kinked. 5. Check to be sure the dryer is level. 6. Plug into a grounded 3 prong outlet. 7. Remove the blue protective film on the console and any tape remaining on the dryer. 8. Read �Dryer Use.� 9. Wipe the dryer drum interior thoroughly with a damp cloth to remove any dust. 10. Set the dryer on a full heat cycle (not the Air cycle) for 20 minutes. Open the dryer door after five minutes and feel for heat. If you do not feel heat, turn the dryer off and wait five minutes.

DRYER USE
Starting Your Dryer

Explosion Hazard Keep flammable materials and vapors, such as gasoline, away from dryer. Do not dry anything that has ever had anything flammable on it (even after washing). Failure to follow these instructions can result in death, explosion, or fire.

Then check the following:
s s

Controls are set in a running or �On� position. Start button has been pushed firmly.

Repeat 5-minute test as outlined above. If dryer still does not operate properly, check the following: s Dryer is plugged into a grounded outlet.
s s

Electrical supply is connected. House fuse is intact and tight; or circuit breaker has not tripped. Dryer door is closed. If dryer makes an unusual noise, check that dryer is level.

s s

NOTE: You may notice a burning odor. This odor is common when the heating element is first used. The odor will go away.

Fire Hazard No washer can completely remove oil. Do not dry anything that has ever had any type of oil on it (including cooking oils). Items containing foam, rubber, or plastic must be dried on a clothesline or by using an Air Cycle. Failure to follow these instructions can result in death or fire.

10