Operating in Tablet Mode
In addition to being used as a regular notebook computer (Laptop mode), this computer can also be operated in Tablet mode. Simply turn the display around 180°, and close the computer with the display facing up. In Tablet mode, the computer can be operated using the digitizer ( page 22), the Input Panel and the tablet buttons ( �Tablet Buttons�), instead of the internal keyboard and the touch pad. Set the computer in Tablet mode using the following procedure.
1 Open the display so that it is perpendicular with the body of the computer. 2 1 2 2 Slide latch C to the right, and then without releasing it, turn the display clockwise by 180°.
CAUTION
Do not rotate the display more than 180° or attempt to rotate the display counterclockwise.
2
Latch C
3 Close the computer with the display facing up. 3
4 Pull up latch A. 4
Latch A Latch B
5 5 Position latch B on the display side, then bring latch A down to fix the display in place.
Latch A
NOTE
To return to Laptop mode: Perform the steps for changing the computer into Tablet mode, only in reverse order. 1 Pull up latch A and release latch B. 2 Open the display. 3 Slide latch C to the right, and then without releasing it, turn the display counter-clockwise by 180°. Latch C
Usage Example
In Tablet Mode, the computer can be operated while holding the body as shown in the figure.
